PRODUCTS FEATURES

  • Vibration free steel body
  • Accurate cutting
  • Adjustable eccentric roller blade guides
  • Easy blade installation
  • 3 cutting speeds with v-belt drive
  • Efficient coolant system
  • Enclosed gear box with gears in oil bath
  • Auto shut-off at the end of cut
  • Top arm weight is controlled by counter balance spring and hydraulic cylinder with adjustable knob, to ensure controlled feed pressure on the blade
  • Window for thank cleaning
  • Supper Roller on Body
  • Chip removing brush
 
 
 

Semi - Automatic

 

 

 

Specifications

MODEL DCA-250 DCA-350 DCA-450
CUTTING CAPACITY Round / square (mm) 250 / 200 350 / 350 450 / 450
BLADE SIZE (Bi-metal) L x W x T 3305 x 27 x 0.9 4420 x 34 x 1.1 5450 x 41 x1.3
Cutting speed m / min 25-40-60
(VFD – Optional)
25-40-60
(VFD – Optional)
25-40-60
(VFD – Optional)
motors Blade drive 2 hp 5 hp 7.5 hp
Hydraulic pump 1 hp 1.5 hp 2  hp
Coolant pump 0.15 hp 0.15 hp 0.25 hp
Chip brush Driven by motor Driven by motor Driven by motor
Tanks Hydraulic reservoir 40 ltr. 60 ltr. 75 ltr.
Coolant reservoir 40 ltr. 60 ltr. 75 ltr.
Coolent pump Flow rate (ltr./ min.) 40 65 65
Cutting taper Accuracy   ± 0.5 for dia <150 ± 0.5 for dia <150 ± 0.5 for dia <150
  ± 1 for dia >150 ± 2 for dia >250 ± 2 for dia >250
Machine weight (approx.)   900 kg 1800 kg 2500 kg
Floor space L x W (mm) 3000 x 2800 3500 x 3000 3800 x 3500

# Specification may change without notice at the sole discretion of our design department in view of continuous design development / improvement.

Standard Accessories

  • Hydraulic band tension mechanism with variable pressure control.
  • In bound rollers for material support and easy feeding.
  • Stock index length setting with digital read out.
  • Split front vice & floating rear vice.
  • Full stroke vices.
  • Complete electrification system.
  • Control panel with motor protection system.
  • Complete coolant system / flood coolant system & wash down hose
  • Auto cycle sequencing with plc.
  • Chip conveyor with container.
  • Powered chip brush to clean the blade gullets.
  • Preset cut counter with auto stop facility.
  • Automatic height adjustments for saw frame.
  • Variable feed control valve.
  • Quick approach mechanism.
  • Cutting speed display.

Optional Features

  • Infinitely variable speed drive by A.C. frequency drive.
  • Length setting arrangement with 0.2 mm least least count.
  • Hydraulic bundle cutting attachment.
  • Variable vice pressure.
  • Machine lamp.
  • Customization as per requirement, if possible.
  • Powered chip conveyor.